VWG VW002A
Couldn't load pickup availability
In stock - Ships from our US warehouse
Each kit contains all the parts you need to build a great guitar. This TL Style DIY Guitar kit features an Ash body, Maple neck and Maple Fretboard. The kit comes with standards single coil pickups, but the body is routed to allow for a humbucker pickup in the neck position if you choose.
Preview the Instructions and Wiring Diagram
*Usually. Carrier delays may happen, and remote locations might take a bit longer.
View full details
Style: Guitar
Body Wood: Ash
Neck Wood: Maple
Fretboard Wood: Maple
Fretboard Radius: 12 Inch
Neck Joint: Bolt-on
Number of Frets: 21
Pickups: 2 Single Coil
Controls: 1 Volume, 1 Tone
Bridge Type: Fixed
Hardware Color: Chrome
Truss Rod: Preinstalled, Dual Action
Scale Length: 25-1/2 Inches
Nut Width: 1-5/8 Inch
Bridge Width (E to E):
Difficult Rating: 2/5
Approx. Finished Weight: 9.0 lbs
Expect the nut to be stupidly high. Make sure your bridge goes on straight and don't depend on the pre-drilled pilot holes. Bridge pickup cavity not big enough for a tele bridge pickup which makes zero sense considering the neck pickup cavity is routed for a goddamn humbucker. Also mine came with an extra wiring cavity going to the neck for absolutely no reason.
Great guitar kit !
The screw holes for mounting the bridge are out of place, well towards the tail from where they should be. It's a simple enough problem to fix, but be vigilant. Otherwise, all looks to be in order with this kit. Simple enough project to do with a kid. The delivery was prompt, and without issue.
