VWG VW026
Couldn't load pickup availability
In stock - Ships from our US warehouse
Mini humbucker at the bridge, single coil at the neck, basswood body holding the whole thing in line. The MR DIY Guitar Kit is a slightly weirder, slightly more characterful pickup combo than most kits — and that's the entire point.
Bolt-on neck with frets and dual-action truss rod, fixed bridge, predrilled and routed, two volumes and two tones, pre-sanded. The mini-humbucker-plus-single-coil pairing is unusual in the best way — bright with body, jangly with weight, capable of sounds the standard configurations can't quite reach.
Designed and shipped from the USA. Backed by Vibeworks: defective parts replaced free, no return needed. Build your own guitar that doesn't sound like every other guitar at jam night. The pickup config alone gives you tones nobody else in the room is making.
Preview the Instructions and Wiring Diagram
*Usually. Carrier delays may happen, and remote locations might take a bit longer.
View full details
Style: Guitar
Body Wood: Basswood
Neck Wood: Maple
Fretboard Wood: Rosewood
Fretboard Radius: 12 Inch
Neck Joint: Bolt-on
Number of Frets: 22
Pickups: 1 Mini Humbucker, 1 Single Coil
Controls: 1 Volume, 1 Tone
Bridge Type: Tune-o-matic
Hardware Color: Chrome
Truss Rod: Preinstalled, Dual Action
Scale Length: 24-1/2 Inch
Nut Width: 1-5/8 Inch
Bridge Width (E to E): 2-1/16 Inches
Difficult Rating: 3/5
Approx. Finished Weight: 7.5 lbs
